Print

Lens Adapters, Mounts & Optical Accessories

Lens Adapters, Mounts & Optical Accessories

VD-Film-ada_start.jpg


Display per page
Sort by

PL Universal Mount SS

Product no.: 55/0002

PL universal mount. This mount is made of stainless steel and aluminium with an aluminium lock ring.

PL universal mounts fit most Cooke zoom lenses with intermediate adapters also available from Van Diemen Films.

PL universal mounts have also been used on many telphoto lens conversions. Our mounts are a direct replacements for other universal mounts for example in BNCR, Arribayonet, Aaton, Cameflex.

This mount is suitable for all PL mounted cameras, video or film. The larger aperture is more suited to lenses with 24x36 coverage

 

£252.00 *
Parts In Stock
can be shipped within 7 days
Delivery weight: 250 g

Sony B4 Mount, Back Cap Moulded

Product no.: 75/BCO8488070000

Back Cap for Sony B4 Mount lenses Made in ABS

£6.00 *
Component parts available. Assembled to order.
Delivery weight: 20 g

Range Extender Universal to Universal X2

Product no.: 5500020

Classic x2 Range Extender (Universal screw fit)

£585.00 *
Parts In Stock
can be shipped within 30 days
Delivery weight: 0.9 kg

New Back Cap - PL Mount Hard Rubber new

Product no.: 542879

New hard PL mount back cap in rubber. Rigid enough to use as a stand for a prime lens. Has large diameter flat bottom.

£16.00 *
Old price £25.00
Parts In Stock
can be shipped within 3 days
Delivery weight: 50 g

Nikon Lens Hood - HB-19

Product no.: V2598
Nikon HB-19 Lens Hood for AF-S 28mm-70mm Lens
£10.00 *
Parts In Stock
can be shipped within 3 days
Delivery weight: 150 g

New Macro Extension Unit, For various lenses

Product no.: 68/11301

Universal Macro Extension for Van Diemen, Leica and Cooke lenses. Allows for greater ratio of  macro focus.

The focus scale ring becomes off set when this unit is attached .

Works with most Van Diemen Macro lenses  

Does not work with 100mm Leica 2.8. It would be possible to make a special unit if requested

£350.00 *
Parts In Stock
can be shipped within 3 days
Delivery weight: 0.4 kg

Pentax to Universal adapter

Product no.: 5500-Pentax
£136.00 *
Parts In Stock
can be shipped within 3 days
Delivery weight: 250 g

Arri Bayonet mount genuine product used - clamp ring type

Product no.: 155/V2838

Arri Bayonet mount recovered from Zeiss distagon lenses secured with a SS clamp ring not supplied

The lock ring can be supplied cost £45-00

£10.00 *
Old price £75.00
Parts In Stock
can be shipped within 3 days
Delivery weight: 100 g

Arri Bayonet mount - 8 screw type

Product no.: 55/V2963

Arri bayonet mounts attached with 8 screws  Screws are extra cos £ 20-00 per set

£5.00 *
Parts In Stock
can be shipped within 3 days
Delivery weight: 100 g

Crank handle and zoom damper for Angenieux lenses

£25.00 *
Component parts available. Assembled to order.
Delivery weight: 150 g

Zoom damper for Angenieux 9.5-95mm lens

Product no.: V3214 + V3215
£25.00 *
Parts In Stock
can be shipped within 3 days
Delivery weight: 100 g

Arri PL Back cap Hard Plastic ABS (Used)

Product no.: 102160-0052

Arriflex design PL back cap used condition good working order .

 

New Van Diemen equivalents also available £16-00 Made od Rubber shock absorbing do not shake loose

£10.00 *
Component parts available. Assembled to order.
Delivery weight: 60 g

Support Bridge Variable Height 15mm Bar x 60mm Centres for 3/8 &1/4ww fit

Product no.: 8/072317

1/4-3/8 ww Lens support Has a thread reducer to allow unit to fit both thread femal sizes

Designed for use with 15mm bars

Ideally suited to the Van Diemen Cine Iscorama conversion

£150.00 *
Component parts available. Assembled to order.
Delivery weight: 150 g

ISCO VII 30 Anamorphic Close Focus Fixed Front Conversion

Product no.: 72/7234

Van Diemen - Cine Iscorama modification second generation faster focus

For use on video cameras. New movement and closer focus with focus gear built in. 80mm front retains original filter thread but is non rotating allowing the attachment of accessories. There is a positive lock system. It has a 58mm rear mounting thread and step adapters are available. There is a built in 1/4 Whitworth threaded hole to accept a support system.

£1,950.00 *
Parts In Stock
can be shipped within 90 days
Delivery weight: 1.5 kg

ISCO 36 V11 Conversion Anamorphic Close Non rotating Front

Product no.: 72/7235

Van Diemen - Cine Iscorama II modification

For use on video cameras. New movement and closer focus with focus gear built in. 80mm front retains original filter thread but is non rotating allowing the attachment of accessories. There is a positive lock system. It has a 58mm rear mounting thread and step adapters are available. There is a built in 1/4 Whitworth threaded hole to accept support.

£1,950.00 *
Parts In Stock
can be shipped within 30 days
Delivery weight: 1.2 kg

Universal to PL Adaptor 58mm thread

Product no.: 550002

This PL universal mount is based on the universal 58mm thread system with a 3mm locating slot cut into the the mating Face .

The original design was made by Coooke in the days of the Cooke Varotal & cine Varotal Lenses. It has since been used on manytelephoto lens conversions .

Beware there are some variations in particular the lock down rings which generally come in two sizes long and short.

If in doubt measure the depth of the available thread on your lens and let us know we will endeavour to send you the correct lock ring (Default order the short one)

£268.00 *
Parts In Stock
can be shipped within 7 days
Delivery weight: 250 g

New ISCO 30 Anamorphic VI Van Diemen conversion

Product no.: 72/7236

Van Diemen - Cine Iscorama modification for use on video cameras new movement closer focus, focus gear built in, 80mm front, retains original filter thread, positive lock system. 58mm rear mounting thread. Step adapters available. Built in 1/4ww threaded hole to accept support . 

£850.00 *
Parts In Stock
can be shipped within circa 30 days
Delivery weight: 1.8 kg

ISCO 42 Conversion

Product no.: 72/7232

Van Diemen - Cine Iscorama Modification

For use on video cameras. New movement and closer focus with focus gear built in. 85mm front retains original filter thread but is non rotating allowing the attachment of accessories. There is a positive lock system. It has a 62mm rear mounting thread and step adapters are available. There is a clamp around support system available for this unit. Part no. 72372.

 

The Cine Iscorama Anamorphic can be designed to suit a number of focal length lenses and formats.

General Specifications:

Static front ring with 82mm front thread.

The back thread diameter is typically 62mm at a standard pitch of 0.75mm (filter thread).

The front lens cap diameter is 85mm.

Once screwed into position the Anamorphic can be aligned and locked.

Close Focus is 3ft 

End to end focus rotation is around 246 degrees.

Bespoke engraving is available at extra cost - please enquire.

This conversion is for a client supplied optic.

Conversions are subject to the provided optic being in good optical and mechanical condition. Optics will be inspected on delivery and if not in suitable condition a full refund will be given. For further information on suitability please contacy our Optical Service Centre.

£2,100.00 *
Parts In Stock
can be shipped within 30 days
Delivery weight: 1.2 kg
*
Prices without VAT or delivery